Order Products : sales@su-jiao.com
Comco PEEK mod.
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Comco-Plastic GmbH |
| Trademark: | Comco |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bo6Dp7_Comco-PEEK-mod-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Comco PEEK mod. is a Polyetheretherketone (PEEK) material. It is available in Europe. Primary attribute of Comco PEEK mod.: Flame Rated. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.45 | g/cm³ | ISO 1183 |
| Water Absorption | |||
| Saturation, 23°C | 0.30 | % | |
| Equilibrium, 23°C, 50% RH | 0.14 | % | |
| Water Absorption | ISO 62 | ||
| after 24 h immersion in water : 23°C | 4.0 | mg | |
| after 96 h immersion in water : 23°C | 9.0 | mg |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Maximum Service Temperature | |||
| in air continuosly | 250 | °C | |
| in air for short periods | 310 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 85 | ISO 2039-2 | |
| Ball Indentation Hardness | 215 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 55900 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 75.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 5.0 | % | ISO 527-2 |
| Compressive Stress | ISO 604 | ||
| 2% Strain | 67.0 | MPa | |
| 1% Strain | 34.0 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 2.5 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | 25 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 195 | °C | ISO 75-2/A |
| Melting Temperature | 340 | °C | |
| CLTE - Flow | |||
| 23 to 60°C | 3.0E-5 | cm/cm/°C | |
| 23 to 100°C | 3.0E-5 | cm/cm/°C | |
| Thermal Conductivity | 0.24 | W/m/K |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 3.00 mm | V-0 | ||
| 6.00 mm | V-0 | ||
| Oxygen Index | 43 | % | ISO 4589-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Badamid® LB70 M30 | Bada AG | Nylon 6 | Badamid® |
| Evatane® 18-150 | Arkema | EVA | Evatane® |
| Desmopan® DP 9370AU | Covestro - PUR | TPU-Polyether | Desmopan® |
| Grilon® BM 17 | EMS-GRIVORY | Nylon, Unspecified | Grilon® |
| Hostacom D M2 T32 | LyondellBasell Industries | PP Copolymer | Hostacom |
