TECHNYL® B 216 GREY 282 NV Datasheet,Nylon 66/6,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® B 216 Grey 282 NV is an unreinforced copolyamide 66/6, medium viscosity, for injection moulding. This grade offers an excellent combination between impact resistance, rigidity, thermal resistance and surface appearance.

General Information
Features	Good liquidity Good demoulding performance Excellent appearance
Uses	Industrial application Application in Automobile Field Consumer goods application field
Agency Ratings	EC 1907/2006 (REACH)
Appearance	Black Grey Natural color
Forms	Particle
Processing Method	Injection molding
Resin ID (ISO 1043)	PA66/6

Physical	Dry	Conditioned	Unit	Test Method
Density	1.14	--	g/cm³	ISO 1183/A
Water Absorption (23°C, 24 hr)	1.6	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	3000	1100	MPa	ISO 527-2/1A
Tensile Stress				ISO 527-2/1A
Yield, 23°C	85.0	50.0	MPa	ISO 527-2/1A
Fracture, 23°C	75.0	60.0	MPa	ISO 527-2/1A
Tensile Strain				ISO 527-2
Yield, 23°C	3.6	25	%	ISO 527-2
Fracture, 23°C	30	--	%	ISO 527-2
Flexural Modulus (23°C)	3000	1200	MPa	ISO 178
Flexural Stress (23°C)	125	50.0	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (23°C)	5.0	16	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	No Break	--		ISO 179/1eU
Notched Izod Impact (23°C)	5.0	16	kJ/m²	ISO 180

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	67.0	--	°C	ISO 75-2/Af
Melting Temperature	242	--	°C	ISO 11357-3

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	1.0E+15	1.0E+14	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+15	ohms·cm	IEC 60093
Dielectric Strength (2.00 mm)	26	24	kV/mm	IEC 60243-1
Relative Permittivity	3.00	3.20		IEC 60250
Dissipation Factor	0.030	0.10		IEC 60250
Comparative Tracking Index				IEC 60112
Solution a	600	600	V	IEC 60112
Solution B	575	--	V	IEC 60112

Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating				UL 94
1.6 mm	HB	--		UL 94
3.2 mm	V-2	--		UL 94
Oxygen Index	24	--	%	ISO 4589-2

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	250 - 260	°C
Middle Temperature	255 - 265	°C
Front Temperature	265 - 275	°C
Mold Temperature	60 - 80	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For unfilled polyamide, Solvay recommends the use of high alloy steel with a weak chromium content. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For unfilled polyamide, Solvay recommends the use of high alloy steel with a weak chromium content. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Category:	Nylon 66/6 , Polyamide 66/6 Copolymer
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bnaCuS_TECHNYLB216GREY282NV.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
SUMIKASUPER® LCP E6808 WO2	Sumitomo Chemical Co., Ltd.	LCP	SUMIKASUPER® LCP
ALTECH® PA66 A 2030/589 GF30	ALBIS PLASTIC GmbH	Nylon 66	ALTECH® PA66
PALBLEND® R 85	pal plast GmbH	PC+ABS	PALBLEND®
Badatron® PPS GF/M65	Bada AG	PPS	Badatron®
Dow Corning® QP1-230	Dow Corning Corporation	Silicone	Dow Corning®