Order Products : sales@su-jiao.com

3M™ Dyneon™ PTFE Compound FC 16863

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ PTFE Compound
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bnI6GR_3MDyneonPTFECompoundFC16863.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

3M™ Dyneon™ PTFE Compound FC 16863 is a non-free-flowing suspension PTFE compound containing a 62.5% bronze/graphite filler combination for compression moulding.

Special Features

Increased thermal dimensional stability

Increased surface hardness

Improved deformation under load

Reduced friction and wear

Low moulding pressure

High limiting oxygen index (LOI)

Low friction behaviour

Improved mechanical properties

Exceptional temperature resistance

Good chemical stability

General Information
Filler / Reinforcement	Bronze\Graphite, 63% filler by weight
Features	Low friction coefficient
Uses	Seals Application in Automobile Field
Forms	Powder
Processing Method	Compression molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	3.30	g/cm³	ASTM D4745-06
Apparent Density	0.76	g/cm³	ASTM D4894-07
Molding Shrinkage - Flow	0.90	%	ASTM D4894-07

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	71		DIN 53505

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	14.4	MPa	ASTM D4745-06
Tensile Elongation (Break)	14	%	ASTM D4745-06

Resin Grade	Manufacturer	Category	Trademark
Bynel® E418	DuPont Packaging & Industrial Polymers	EVA	Bynel®
Fainplast PVC MPH 69	Fainplast Compounds S.r.l	PVC, Flexible	Fainplast PVC
HiFill® TPU 0600	Techmer Engineered Solutions	TPU, Unspecified	HiFill®
KOPA® KN133HB40RRBL	Kolon Plastics, Inc.	Nylon 6	KOPA®
Abstron TG3MM	Bhansali Engineering Polymers Limited	ABS	Abstron