Order Products : sales@su-jiao.com
REPOL® H080EY
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | REPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bmmC1e_REPOL-H080EY.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Repol H080EY is recommended for use in TQ (Tubular Water Quench) and Cast Film. It contains slip and antiblock additives. Repol H080EY is an ideal material to use in textile overwraps, packaging of readymade garments, snack food, grocery and general purpose packaging. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 35.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1450 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 38 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 99.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | Type I, 50 mm/min |
| 2 . | Type I, 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BMC 685 | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| Gravi-Tech™ GRV-TE1-090-W-NAT | PolyOne Corporation | SIS | Gravi-Tech™ |
| KOCETAL® K300LOBBN | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
| Hyundai EP TPO HR570 | HYUNDAI EP Co., Ltd. | TPO (POE) | Hyundai EP TPO |
| KMI PP KM60-51 5XL | KMI Group, Inc. | PP Copolymer | KMI PP |
