Order Products : sales@su-jiao.com
MAJORIS EB760
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | blvLgK_MAJORIS-EB760.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EB760 is a natural, 70% mineral filled polypropylene compound intended for injection moulding. The product is available in natural (EB760) and black (EB760 - 8229) but other colours can be supplied on request. EB760 has been developed for applications where high density, good impact strength, good surface finish and good flow properties are necessary. APPLICATIONS High density products, such as:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 2.00 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 14 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.30 - 0.50 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus - 1% Secant | 3650 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 6.0 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 116 | °C | ISO 75-2/B |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 220 - 270 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PTFA 05 | Polymer Tailoring Ltd. | PE, Unspecified | PTFA |
| Siloxane Masterbatch MB50-315 | Multibase, A Dow Corning Company | Siloxane, UHMW | Siloxane Masterbatch |
| Sylvin 6212-75 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Veroplas GRSJ3 | PlastxWorld Inc. | SAN | Veroplas |
| EVALENE® PP PHY0351 | JG Summit Petrochemical Corporation | PP Homopolymer | EVALENE® PP |
