Order Products : sales@su-jiao.com
XYRON™ AT610
| Category: | Nylon+PPE , Polyamide + PPE |
| Manufacturer: | Asahi Kasei Chemicals Corporation |
| Trademark: | XYRON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bl5KeR_XYRON-AT610.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Modified PPE PA/PPE alloy Non-reinforced Non-Flame retardant |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.09 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1(3.00 mm) | 1.4 to 2.0 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 66.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 35 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 2300 | MPa | ISO 178 |
| Flexural Stress (23°C) | 99.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength 2(23°C) | 20 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 113 | °C | ISO 75-2/A |
| CLTE - Flow (-30 to 65°C) | 9.0E-5 | cm/cm/°C | ISO 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 7.6E+15 | ohms·cm | IEC 60093 |
| Electric Strength 3(2.00 mm) | 25 | kV/mm | IEC 60243-1 |
| Dielectric Constant | IEC 60250 | ||
| 100 Hz | 3.10 | ||
| 1 MHz | 2.90 | ||
| Dissipation Factor | IEC 60250 | ||
| 100 Hz | 5.0E-3 | ||
| 1 MHz | 0.011 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 to 130 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Processing (Melt) Temp | 280 to 300 | °C | |
| Mold Temperature | 60.0 to 120 | °C |
| Note Message | |
|---|---|
| 1 . | 120x80x3 mm |
| 2 . | 4 mm |
| 3 . | Short time |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumikon® PM-9625 | Sumitomo Bakelite Co., Ltd. | Phenolic | Sumikon® |
| ELASTOSIL® P 7630 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® P |
| Kynar® 461 | Arkema | PVDF | Kynar® |
| Karina COMP. PVC CRYSTAL -E 60/271 | Karina Ind. e Com. de Plásticos Ltda | PVC, Flexible | Karina |
| POLYfill PPH TS5040DS | Polykemi AB | PP Homopolymer | POLYfill |
