Order Products : sales@su-jiao.com

POTICON AM2

Category:	PPS , Polyphenylene Sulfide
Manufacturer:	Otsuka Chemical Co., Ltd.
Trademark:	POTICON
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bkozfC_POTICONAM2.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The Poticon series features a potassium titanate micro-filler compounded in thermoplastic resins to provide outstanding micro-reinforcement and dimensional stability. The excellent surface smoothness of these compounds limits friction toward opposing materials, reducing wear and allowing for greaseless applications. Moreover, as Poticon diminishes damage toward the mold and metal die and offers excellent recyclability, it also decreases processing costs.

Advantages

Microscopic reinforcement

Superior friction sliding and wear reduction

Excellent dimensional accuracy and surface smoothness

Highly recyclable

Applications

Automotive Parts (gears, bearings)

LED Reflectors

Watch Parts (gears, ground plane)

Camera (image stabilization parts)

Sliding Parts (gears, wheel bearing)

Camera Module Parts

Motor Parts (cog-wheels, bearings)

AM2 Property: High strength, High rigidity, Slide, Conductive property

General Information
Features	High Dimensional Stability Conductivity Low friction coefficient Rigidity, high High strength Recyclable materials
Uses	LEDs Gear Application in Automobile Field Camera application Bearing
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.68	g/cm³	ASTM D792
Molding Shrinkage
Flow	0.20	%
Transverse flow	0.70	%
Water Absorption (Equilibrium)	0.080	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	86		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	157	MPa	ASTM D638
Tensile Elongation (Break)	3.0	%	ASTM D638
Flexural Modulus	14700	MPa	ASTM D790
Flexural Strength	201	MPa	ASTM D790
Coefficient of Friction (vs. Steel - Dynamic)	0.15
Abrasion Loss
-- ¹	7.10	10^-3 mm³/N·km
of counterpart ²	0.100	10^-3 mm³/N·km

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	235	°C	ASTM D648

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	29	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
CLTE - Flow	1.1E-5	cm/cm/°C	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+5	ohms·cm	ASTM D257

Flammability	Nominal Value	Unit	Test Method
Flame Rating	V-0		UL 94

Injection	Nominal Value	Unit
Processing (Melt) Temp	290 - 320	°C
Mold Temperature	120 - 150	°C
Injection Pressure	70.0 - 100	MPa

Note Message
1 .	Surface pressure: 1MPa
2 .	Slipping velocity: 0.3m/sec

Resin Grade	Manufacturer	Category	Trademark
TAIRIPRO K8025	Formosa Plastics Corporation	PP Impact Copolymer	TAIRIPRO
Clariant ABS ABS6476	Clariant Corporation	ABS	Clariant ABS
Kepital® ED-10	KEP Americas	Acetal (POM) Copolymer	Kepital®
Huafon JF-S-8032	Huafon Group Co., Ltd.	PUR, Unspecified	Huafon
LNP™ THERMOCOMP™ MF006SXP compound	SABIC Innovative Plastics	PP, Unspecified	LNP™ THERMOCOMP™