Order Products : sales@su-jiao.com

Texalan® 3 Series 398A

Category:	TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester)
Manufacturer:	Austin Novel Materials Co. Ltd.
Trademark:	Texalan® 3 Series
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bdsFNF_Texalan-3-Series-398A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Texalan® 3 Series 398A is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) material. It is available in Asia Pacific, Europe, or North America for blow molding, calendering, coextrusion, extrusion, film extrusion, or injection molding.

Important attributes of Texalan® 3 Series 398A are:

Chemical Resistant

High Strength

Impact Resistant

Low Temperature Resistant

Wear Resistant

General Information
Features	Good Abrasion Resistance High Elasticity High Impact Resistance High Tensile Strength Low Temperature Resistant Oil Resistant
Processing Method	Blow Molding Calendering Coextrusion Extrusion Film Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.20 to 1.24	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	95 to 101		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Abrasion Resistance	< 60.0	mm³	ISO 4649

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ISO 37
100% Strain	> 9.00	MPa
300% Strain	> 20.0	MPa
Tensile Stress (Yield)	> 44.0	MPa	ISO 37
Tensile Elongation (Break)	> 420	%	ISO 37
Tear Strength	> 120	kN/m	ISO 34-1
Compression Set (70°C)	< 55	%	ISO 815

Resin Grade	Manufacturer	Category	Trademark
Quadrant EPP ERTALON® 6 XAU+	Quadrant Engineering Plastic Products	Nylon 6	Quadrant EPP
Amodel® FC-1160	Solvay Specialty Polymers	PPA	Amodel®
Elastron® V P.V101.A55.B	Elastron USA, Inc.	TPV	Elastron® V
Karina GRAY COLOR CONCENTRATE 18/ 89-FC-LMP	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
THERMOLAST® V TV5VAZ (Series: LTP/PA)	KRAIBURG TPE	TPE	THERMOLAST® V