Order Products : sales@su-jiao.com
Filter-bond™ R-37-38
| Category: | TS, Unspecified , Thermoset, Unspecified |
| Manufacturer: | Hapco Inc. |
| Trademark: | Filter-bond™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bdhos9_Filter-bond-R-37-38.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Filter-bond is a series of casting and potting compounds ideally suited for medical and food contact applications. This Filter-bond R-SERIES is manufactured to ultra-high quality standards and has been used by customers to pass biocompatibility requirements. FILTER-bond R-3738 is a structural adhesive system specifically developed to bond filter media in Filter and Ultrafiltration applications. FILTER-bond R-3738 provides excellent adhesion to similar and non-similar substances. It is also chemically resistant. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D4669 |
| Molding Shrinkage - Flow | 0.050 to 0.20 | % | ASTM D2566 |
| Weight - per cubic inch | 20 | g |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | 96 100 | °C | ASTM D648 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time 1(25°C) | 36.0 to 52.0 | min | ASTM D2971 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cure Time (21°C) | 1.0 | day |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 79 to 89 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2380 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 70.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 6.0 | % | ASTM D638 |
| Flexural Modulus | 1830 | MPa | ASTM D790 |
| Flexural Strength | 66.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 1.1 | J/m | ASTM D256 |
| Unnotched Izod Impact | 59 | J/m | ASTM D256 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Part B | Mix Ratio by Weight: 31, Mix Ratio by Volume: 33 | ||
| Thermoset Mix Viscosity (25°C) | 8000 to 14000 | cP | ASTM D4878 |
| Note Message | |
|---|---|
| 1 . | 100 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starflam PX06091 | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| Unichem 4075 | Colorite Polymers | PVC, Unspecified | Unichem |
| ALCUDIA® HDPE 5703-L | REPSOL | HDPE | ALCUDIA® HDPE |
| DuPure庐 R 87 E | Ducor Petrochemicals BV | PP Homopolymer | DuPure® |
| APEL™ APL5014CL | Mitsui Chemicals, Inc. | COC | APEL™ |
