Order Products : sales@su-jiao.com
Braskem PE HD9601C
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bdVq6P_BraskemPEHD9601C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HD9601C is a High Density Polyethylene and high molecular weight suitable for large part blown molded. It offers high ESCR, with excellent balance of hardness and impact strength. Application: Large part blown molded. Process: Blow Molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.955 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 2.00 mm, 10% Igepal, Compression Molded, F50) | > 250 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus - 1% Secant (Compression Molded) | 1350 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Impact Strength 1(-40°C) | No Break | J/m | ASTM D6110 |
| Note Message | |
|---|---|
| 1 . | Compression Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ADMER™ NF448E | Mitsui Chemicals Europe GmbH | LLDPE | ADMER™ |
| BMC 3001 | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| Diakon® CLG356LT | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| DOWLEX™ 2045P | The Dow Chemical Company | LLDPE | DOWLEX™ |
| ADENE® B03CZE-00 | A.D. Compound S.p.A. | PP Homopolymer | ADENE® |
