Order Products : sales@su-jiao.com
UNITIKA Nylon 6 M1030B
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | UNITIKA Plastics Division |
| Trademark: | UNITIKA Nylon 6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bc4P8s_UNITIKANylon6M1030B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nano composite nylon |
| General Information | |
|---|---|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.14 | 1.14 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | |||
| Flow : 3.20mm | 0.80 | 0.80 | % | ASTM D955 |
| Transverse flow : 3.20mm | 1.0 | 1.0 | % | ASTM D955 |
| Water Absorption | ||||
| 23°C, 24 hr | 1.0 | 1.0 | % | |
| Balanced, 23°C, 50%RH | 2.8 | 2.8 | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 113 | 90 | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength (Break) | 85.0 | 55.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 20 | 35 | % | ASTM D638 |
| Flexural Modulus | 3700 | 1500 | MPa | ASTM D790 |
| Flexural Strength | 133 | 50.0 | MPa | ASTM D790 |
| Compressive Strength | 85.0 | 60.0 | MPa | ASTM D695 |
| Shear Strength | 62.0 | 48.0 | MPa | ASTM D732 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | 40 | 250 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, not annealed | 190 | -- | °C | ASTM D648 |
| 1.8 MPa, not annealed | 120 | -- | °C | ASTM D648 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | -- | ohms·cm | ASTM D257 |
| Dielectric Strength 1 | 27 | -- | kV/mm | ASTM D149 |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vi-Chem PVC VDM87-15E/30E-8814 | Vi-Chem Corporation | PVC, Unspecified | Vi-Chem PVC |
| NOVAREX® M7027BF | Mitsubishi Engineering-Plastics Corp | PC | NOVAREX® |
| ALTECH® PA6 A 1000/126 UV | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| EcoBlend® PAE9730 | Shanghai KumhoSunny Plastics Co., Ltd. | ABS+PET | EcoBlend® |
| Iupilon® EFT3200H | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
