Order Products : sales@su-jiao.com
CERTENE™ LDI-5523
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bbtzTG_CERTENE-LDI-5523.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LDI-5523 is a certified prime grade designed for High-Flow INJECTION MOLDING applications. LDI-5523 features easy processability, excellent flexibility, good clarity and low warpage. Typical applications for LDI-5523 include lids. LDI-5523 complies with FDA regulation 21CFR 177.1520 (c) 2.1. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 55 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 11.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 55 | % | ASTM D638 |
| Flexural Modulus - 2% Secant | 331 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -20.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 90.0 | °C | ASTM D1525 |
| Melting Temperature | 110 | °C | DSC |
| Additional Information |
|---|
| Plaques molded and tested per ASTM D4976. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® 1248 MAS068 | Covestro - Polycarbonates | PC | Makrolon® |
| Topilene® HB240P | Hyosung Corporation | PP Impact Copolymer | Topilene® |
| 3M™ Dyneon™ PTFE TF 2029Z | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE |
| Adell Polyamide BJ-14 Glass Reinforced High Impact | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| elitel UE3500 | UNITIKA Plastics Division | TPC-ET | elitel |
