Order Products : sales@su-jiao.com
Shinko-Lac® ASA FA-40
| Category: | ASA+PC , Acrylonitrile Styrene Acrylate + PC |
| Manufacturer: | Mitsubishi Rayon America Inc. |
| Trademark: | Shinko-Lac® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bZyOsB_Shinko-Lac-ASA-FA-40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Shinko-Lac® ASA FA-40 is an Acrylonitrile Styrene Acrylate + PC (ASA+PC) material. It is available in North America for injection molding. Important attributes of Shinko-Lac® ASA FA-40 are:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 53.9 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 2300 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 86.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 390 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.35 mm, Injection Molded | 125 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm, Injection Molded | 105 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.00 mm) | V-0 | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Pyramid™ PEEK KD2000-R01 | Polymics, Ltd. | PEEK | Pyramid™ PEEK |
| TRILOY® 210NHFP | Samyang Corporation | PC+ABS | TRILOY® |
| Hanwha Total PP CB75 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| apilon 52® TL 25 NS | API SpA | TPU-Polyether | apilon 52® |
| SQUARE® LSG1010-10A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
