Order Products : sales@su-jiao.com
Sinvicomp SZN6028A
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bZTUIE_Sinvicomp-SZN6028A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| "Sinvicomp"SZN 6028A is a wire & cable polyvinylchloride compound available in pellet form. SZN 6028A provides good abrasion and chemical resistance to jacketing of cables. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Wire Types (AS 3147/3191) |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 17.0 | MPa | IEC 60811-1-1 |
| Tensile Elongation (Break) | 350 | % | IEC 60811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Changes in mechanical properties after hot air aging test, 115°C, 504 hr 1 | AS 3147/3191 | ||
| Tensile strength change | 10 | % | AS 3147/3191 |
| Change in tensile elongation | 30 | % | AS 3147/3191 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal deformation- 120°C, 1hr (120°C) | 45 | % | BS 6469 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Loss of Mass - 115±2°C, 5days 2(115°C) | 1.20 | mg/cm² | BS 2782 |
| Typical temperature profile for processing SINVICOMP compound is from 160°C to 180°C. The optimum temperatures depend on the type of machine as well as screw design being used to process SINVICOMP.Feeding zone: 160°CCompression zone: 160°C~170°CMixing zone: 170°C~180°CNozzle/Die Zone: 180°C |
| Note Message | |
|---|---|
| 1 . | 115±2°C |
| 2 . | 115±2°C, 5days, BS2782:1970 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RapidVac™ VA-1515 | Innovative Polymers, Inc. | TSU | RapidVac™ |
| TEKANATE™ G7013 | Mando Advanced Materials Co., Ltd. | PC | TEKANATE™ |
| PELPRENE™ P50DFR | TOYOBO America, Inc. | TPEE | PELPRENE™ |
| Petrothene® XL07425 | LyondellBasell Industries | Polyolefin, Unspecified | Petrothene® |
| Plenco 07591 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
