Order Products : sales@su-jiao.com
MIRASON™ 10P
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Mitsui Chemicals, Inc. |
| Trademark: | MIRASON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bXbDZA_MIRASON-10P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MIRASON™ 10P is a Low Density Polyethylene material. It is available in Asia Pacific for extrusion coating. Primary attribute of MIRASON™ 10P: Good Processability. Typical application of MIRASON™ 10P: Coating Applications |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.917 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 9.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 49 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 8.53 | MPa | |
| Break | 13.7 | MPa | |
| Tensile Elongation (Break) | 600 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 85.0 | °C | ASTM D1525 |
| Melting Temperature | 106 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYNIL® P36/4 | Nilit Plastics | Nylon 66 | POLYNIL® |
| ColorFast® GPA100 | LTL Color Compounders, Inc. | ABS | ColorFast® |
| Edgetek™ ET7400-8001 HG NC001 | PolyOne Corporation | PS (HIPS) | Edgetek™ |
| PLUSTEK PB318G9 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
| POCAN® T 3150 XF 000000 | LANXESS Corporation | PBT+PET | POCAN® |
