Order Products : sales@su-jiao.com
TITANLENE® LDF 200GG
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Lotte Chemical Titan (M) Sdn. Bhd. |
| Trademark: | TITANLENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bXXvZg_TITANLENE-LDF-200GG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LDF200GG is a low density polyethylene resin for film extrusion. LDF200GG has medium slip and anti-block additives. LDF200GG meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 21 CFR 177.1520 (c) 2.1 & (c) 2.2. APPLICATIONS: Produce bags, T-shirt carrier bags, Display packaging, Light duty shrink film. Characteristics: Good optical and mechanical properties. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 30 | µm | |
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD : 30 µm, Blown Film | 206 | MPa | |
| 1% Secant, TD : 30 µm, Blown Film | 226 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 30 µm, Blown Film | 26.5 | MPa | |
| TD : Break, 30 µm, Blown Film | 21.6 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 30 µm, Blown Film | 310 | % | |
| TD : Break, 30 µm, Blown Film | 580 | % | |
| Dart Drop Impact (30 µm, Blown Film) | 60 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 30 µm, Blown Film | 180 | g | |
| TD : 30 µm, Blown Film | 120 | g |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 95.0 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze (30.0 µm, Blown Film) | 7.0 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 160 to 180 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYNIL® P85 | Nilit Plastics | Nylon 66 | POLYNIL® |
| ADEKA EP-4000L | Adeka Corporation | Epoxy | ADEKA |
| APEX® 77-W002-B | Teknor Apex Company | PVC, Flexible | APEX® |
| Genestar™ N1001A-M41 | Kuraray Co., Ltd. | Nylon 9T | Genestar™ |
| Lotader® AX 8900 | Arkema | EMAAA | Lotader® |
