Order Products : sales@su-jiao.com

NORDEL™ IP 3430

Category:	EPDM , Hydrocarbon Rubber
Manufacturer:	The Dow Chemical Company
Trademark:	NORDEL™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bXULry_NORDEL-IP-3430.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NORDEL™IP 3430 hydrocarbon rubber is an amorphous ethylene-propylene-diene terpolymer (EPDM) with extremely low diene content, suitable for peroxide cured articles. NORDEL IP 3430 can also be blended with butyl rubber to improve its processing performance and vulcanization performance. It is applied to tire inner tube materials for automobiles and bicycles. Main features: amorphous very low diene content Low molecular weight Heat stability and UV stability Comply with the following regulations Requirements of the FDA Regulation 21 CFR 177.2600, Requirements of the FDA Regulation 21 CFR 177.1520 (see Note 1), The requirements of the FDA Regulation 21 CFR 175.105 (see Note 2), Requirements of the FDA Regulation 21 CFR 177.1210. Please check the regulations for complete details. Application field: Blend with butyl rubber as a blending component for tire inner tubes Peroxide cured molded parts remarks: (1) can be used to contact all types of food, except oil emulsion water, high-fat or low-fat food, low-humidity fat and oil food. (2) Adhesive only.

Message

NORDEL™IP 3430 hydrocarbon rubber is an amorphous ethylene-propylene-diene terpolymer (EPDM) with extremely low diene content, suitable for peroxide cured articles. NORDEL IP 3430 can also be blended with butyl rubber to improve its processing performance and vulcanization performance. It is applied to tire inner tube materials for automobiles and bicycles.

Main features:

amorphous

very low diene content

Low molecular weight

Heat stability and UV stability

Comply with the following regulations

Requirements of the FDA Regulation 21 CFR 177.2600,

Requirements of the FDA Regulation 21 CFR 177.1520 (see Note 1),

The requirements of the FDA Regulation 21 CFR 175.105 (see Note 2),

Requirements of the FDA Regulation 21 CFR 177.1210.

Please check the regulations for complete details.

Application field:

Blend with butyl rubber as a blending component for tire inner tubes

Peroxide cured molded parts

remarks:
(1) can be used to contact all types of food, except oil emulsion water, high-fat or low-fat food, low-humidity fat and oil food.
(2) Adhesive only.

General Information
Agency Ratings	FDA 21 CFR 175.105 FDA 21 CFR 177.1210 FDA 21 CFR 177.1520 FDA 21 CFR 177.2600
Forms	bag

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.860	g/cm³	ASTM D297
Mooney Viscosity (ML 1+4, 125°C)	27	MU	ASTM D1646
Ethylene Content	42.0	wt%	ASTM D3900
Ethylidene Norbornene (ENB) Content	0.8	wt%	ASTM D6047
Propylene content	57.0	wt%	ASTM D3900
Residual conversion metal		ppm	Internal method
Molecular Weight Distribution	Narrow		Internal method
Ash Content		wt%	ASTM D5667
Volatile Matter		wt%	Internal method

Additional Information
存放和处理：暴露在人造光或自然光中可能影响 EPDM 产品的质量。此产品应采用其原始包装并存放在室内，同时避免阳光直射。

Resin Grade	Manufacturer	Category	Trademark
Radilon® A LX 14080 2296	Radici Plastics	Nylon 66	Radilon®
ELASTICHEM™ 5511TX-02	Colorite Polymers	PVC, Flexible	ELASTICHEM™
Electrafil® TPX-PC-02071	Techmer Engineered Solutions	PC	Electrafil®
Pearlbond™ 12F75UV	Lubrizol Advanced Materials, Inc.	TPU-Polyester	Pearlbond™
NILAMID® XS3 GF40	Nilit Plastics	Nylon, Unspecified	NILAMID®