Sarlink® TPE OM-1150N Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Sarlink TPE OM series are high performance specialty thermoplastic elastomers designed for automotive applications requiring excellent bondability to engineered resin substrates. Sarlink TPE OM-1150N is a medium hardness, medium density, opaque grade with good UV resistance that exhibits excellent adhesion to ABS, PC, and PC/ABS.

General Information
Features	Without Fillers Good UV resistance Workability, good Adhesiveness Good adhesion Medium liquidity Good chemical resistance Medium density Medium hardness
Uses	overmolding Automotive Electronics Application in Automobile Field Car interior parts Soft touch application
RoHS Compliance	RoHS compliance
Appearance	Opacity Natural color
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.998	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	15	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding ¹	45	ASTM D2240
Shore A, 5 seconds, injection molding ²	55	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ³			ASTM D412
Transverse flow : 100% strain	1.48	MPa	ASTM D412
Flow : 100% strain	1.65	MPa	ASTM D412
Transverse flow : 300% strain	2.90	MPa	ASTM D412
Flow : 300% strain	3.27	MPa	ASTM D412
Tensile Strength ⁴			ASTM D412
Transverse flow : Fracture	5.67	MPa	ASTM D412
Flow : Fracture	5.87	MPa	ASTM D412
Tensile Elongation ⁵			ASTM D412
Transverse flow : Fracture	550	%	ASTM D412
Flow : Fracture	540	%	ASTM D412
Compression Set ⁶			ASTM D395B
23°C, 22 hr	42	%	ASTM D395B
70°C, 22 hr	91	%	ASTM D395B

Additional Information	Nominal Value	Unit
Adhesion Strength - Cohesive Failure	51	N
Adhesion to ABS
Adhesion to PC
Adhesion to PC/ABS

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Drying Temperature	60	°C
Drying Time	2.0 - 4.0	hr
Rear Temperature	138 - 188	°C
Middle Temperature	154 - 199	°C
Front Temperature	154 - 216	°C
Nozzle Temperature	154 - 221	°C
Processing (Melt) Temp	166 - 221	°C
Mold Temperature	10 - 32	°C
Injection Pressure	1.38 - 5.52	MPa
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.862	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Moisture can degrade the material. Drying is suggested. This can be accomplished by placing the material in a desiccant dryer for 2 to 4 hours at140°F.

Note Message
1 .	Aging 0 hr at 23°C
2 .	Aging 48 hr at 23°C
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	C mold, 510mm/min
6 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bSy7C4_SarlinkTPEOM1150N.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Rulon® 1439	Saint Gobain Performance Plastics	PTFE	Rulon®
Unichem 9273E	Colorite Polymers	PVC, Unspecified	Unichem
ALTECH® PBT + ABS A 2020/620 GF 20 UV	ALBIS PLASTIC GmbH	PBT+ASA	ALTECH® PBT + ABS
Axiall PVC 12792	Axiall Corporation	PVC, Flexible	Axiall PVC
NORYL™ SE1GFN3 resin	SABIC Innovative Plastics	PPE+PS	NORYL™