Order Products : sales@su-jiao.com
Sumitomo PE M8060
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Sumitomo Chemical Asia |
| Trademark: | Sumitomo PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bRolPg_Sumitomo-PE-M8060.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Applications: For technical parts with moderate ESCR requirements, cartridges, storage containers, stacking crates, pallets, and closures. Characteristics: High stiffness and rigidity with good impact, and stress cracking resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792A |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal) | 5.00 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 68 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 29.0 | MPa | |
| Break | 16.0 | MPa | |
| Tensile Elongation (Break) | 760 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 3.0 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 127 | °C | ASTM D1525 1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 160 to 220 | °C | |
| Mold Temperature | 15.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Rate A (50°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SuperLite® SL551600-100 (3.0mm) | Azdel, Inc. | PP, Unspecified | SuperLite® |
| Vexel B12GF45 | Custom Resins Group | PBT | Vexel |
| ALTECH® PA6 B 2015/106 GF15 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Expandable PS F21MB | INEOS Styrenics International SA | PS (EPS) | Expandable PS |
| Kaneka MUH L9401 | Kaneka Corporation | ABS | Kaneka MUH |
