Order Products : sales@su-jiao.com

Nylene® NX3055I

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Custom Resins Group
Trademark:	Nylene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bRgu7o_Nylene-NX3055I.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

High-viscosity nucleated extrusion grade, suitable for film co-extrusion, cast and blown film

Excellent melt stability and strength, faster set-up for increased line speeds

Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors

General Information
Additive	Nucleating Agent
Features	Good Abrasion Resistance Good Strength Good Toughness Grease Resistant High Melt Stability High Viscosity Low Odor Transfer Nucleated
Uses	Cast Film Film
Agency Ratings	FDA Unspecified Rating NSF Unspecified Rating
Processing Method	Blown Film Cast Film Coextrusion Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.13	g/cm³	ASTM D792

Films	Nominal Value	Unit	Test Method
Secant Modulus - MD	652	MPa	ASTM D882
Tensile Strength - MD (Break)	59.6	MPa	ASTM D882
Tensile Elongation - MD (Yield)	290	%	ASTM D882
Elmendorf Tear Strength (23°C)	21.6	kN/m	ASTM D1922

Thermal	Nominal Value	Unit	Test Method
Peak Melting Temperature	216	°C	ASTM D3418

Resin Grade	Manufacturer	Category	Trademark
PRIMACOR™ 1410	The Dow Chemical Company	EAA	PRIMACOR™
TRIREX® Compound 3500G20	Samyang Corporation	PC	TRIREX® Compound
Viton® B-601C	DuPont Performance Elastomers	Fluorelastomer	Viton®
PENTAMID A GV30 H natur	PENTAC Polymer GmbH	Nylon 66	PENTAMID A
Microthene® MP643962	LyondellBasell Industries	LMDPE	Microthene®