Order Products : sales@su-jiao.com
Maxxam™ FR MF5210-0301 DK GRAY 2451
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Maxxam™ FR |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bQSHe6_Maxxam-FR-MF5210-0301-DK-GRAY-2451.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Maxxam™ FR MF5210-0301 DK GRAY 2451 is a Polypropylene product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 4.0 to 12 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.0 to 2.0 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield) | 24.1 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 200 | % | ASTM D638 |
| Flexural Modulus | 1030 | MPa | ASTM D790 |
| Flexural Strength | 31.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm, Injection Molded) | 69 | J/m | ASTM D256A |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | V-0 | ||
| 3.00 mm | V-0 |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NAXALOY® 770-BK272 | MRC Polymers, Inc. | PC+ABS | NAXALOY® |
| Delrin® FG500AL NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| EPO-TEK® TV1003 | Epoxy Technology Inc. | PI, TS | EPO-TEK® |
| OP - PPS 30GF-15PTFE | Oxford Polymers | PPS | OP - PPS |
| Hytrel® 3046 NC010 | DuPont Performance Polymers | TPC-ET | Hytrel® |
