Order Products : sales@su-jiao.com
MAJ'ECO EFR010BS 9445 WHITE 3
| Category: | Biodeg Polymers , Biodegradable Polymers |
| Manufacturer: | AD majoris |
| Trademark: | MAJ'ECO |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bOoK6b_MAJ-ECO-EFR010BS-9445-WHITE-3.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MAJ'ECO EFR010BS 9445 WHITE 3 is a biopolymer compound intended for injection moulding. MAJ'ECO EFR010BS 9445 WHITE 3 has been developed especially for demanding applications in various engineering sectors. APPLICATIONS Product such as:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.21 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 11 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1680 | MPa | ISO 527-2/1 |
| Tensile Stress (Break) | 32.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 4.5 | % | ISO 527-2 |
| Flexural Modulus 1 | 1950 | MPa | ISO 178 |
| Flexural Stress | 57.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 6.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 76 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Test Method | |
|---|---|---|---|
| Ball Pressure Test (125°C) | Pass | NF C 61-303 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glow Wire Flammability Index | IEC 60695-2-12 | ||
| 1.00 mm | 650 | °C | IEC 60695-2-12 |
| 2.00 mm | 650 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 150 - 180 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DOW™ Butene 1211P | The Dow Chemical Company | LLDPE | DOW™ Butene |
| VALOX™ V4760 resin | SABIC Innovative Plastics Asia Pacific | PBT | VALOX™ |
| KPOL-NYLON K-NY6/40CF2 | KPOL Chem Co. | Nylon 66/6 | KPOL-NYLON |
| Latishield 73/13-07A | LATI S.p.A. | Acetal (POM) Copolymer | Latishield |
| Petlon R-Prime B3-G25-00-BK | Petlon Polymers Ltd | Nylon 6 | Petlon R-Prime |
