Order Products : sales@su-jiao.com
RTP 1507-40D
| Category: | TEEE , Thermoplastic Elastomer, Ether-Ester |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bL22zm_RTP-1507-40D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glass Fiber |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.47 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.11 - 0.15 | % | ASTM D955 |
| Moisture Content | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Primary Additive | 40 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 57 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1310 | MPa | ASTM D638 |
| Tensile Strength | 30.7 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | > 10 | % | ASTM D638 |
| Flexural Modulus | 1170 | MPa | ASTM D790 |
| Flexural Strength | 32.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | 410 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.20 mm) | No Break | ASTM D4812 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 210 - 238 | °C | |
| Mold Temperature | 21.1 - 37.8 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen HP548N | LyondellBasell Industries | PP Homopolymer | Moplen |
| Badamid® LA70 GF30 | Bada AG | Nylon 66 | Badamid® |
| Geon™ Vinyl Rigid Extrusion L7035 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| LNP™ LUBRICOMP™ RL004S compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
| CYCOLOY™ CX7211 resin | SABIC Innovative Plastics | PC+ABS | CYCOLOY™ |
