Indothene HD 46GP003

Category:	HDPE , High Density Polyethylene
Manufacturer:	Reliance Industries Limited
Trademark:	Indothene HD
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bK0OYQ_Indothene-HD-46GP003.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Indothene-HD 46GP003 (PE-100) is a natural coloured grade for pipe extrusion, produced by Basell's Stirred Tank Heavy Diluent (STHD) Slurry process. It possesses bimodal molecular weight distribution, which improves processability. This grade meets the MFI, Density & Hydrostatic strength requirements of material grade PE-100 as per IS:4984:1995 (Amendment-3) on "High Density Polyethylene pipe for water supply-specification". The designation of the natural resin of 46GP003 is PE-EAN-C45-T003 as per IS:7328-1992 and shall meet the same given in the amendment No. 2 of IS:4984:1995. When incorporated with adequate quantity of carbon black as specified in clause 5.2.3 of IS:4984:1995, will meet the requirements of the designation PE-EW-C45-T003 mentioned in the clause 5.2 of IS:4984:1995. Pipe made from 46GP003 grade passes the Internal Pressure Creep Rupture Test when tested with 5.5 MPa induced stress at 80°C for 165 hrs and with 5.7 MPa induced stress at 80°C for 48 hrs as per clause 8.1 of IS 4984, thereby meeting the requirements of PE100 grade as per IS: 4984. FOOD CONTACT APPLICATIONS : This grade shall meet the requirements of Indian Standard IS-10146-1982 on "Polyethylene for its safe use in contact with food stuffs, pharmaceuticals and drinking water". It shall also conforms to the positive list of constituents as approved in IS:10141:1982. The grade shall comply with FDA regulation: CFR title 21, 177.1520, Olefin polymer. The level of antioxidant in 46GP003 is not more than 0.3% by mass of the resin.

Message

Indothene-HD 46GP003 (PE-100) is a natural coloured grade for pipe extrusion, produced by Basell's Stirred Tank Heavy Diluent (STHD) Slurry process. It possesses bimodal molecular weight distribution, which improves processability. This grade meets the MFI, Density & Hydrostatic strength requirements of material grade PE-100 as per IS:4984:1995 (Amendment-3) on "High Density Polyethylene pipe for water supply-specification". The designation of the natural resin of 46GP003 is PE-EAN-C45-T003 as per IS:7328-1992 and shall meet the same given in the amendment No. 2 of IS:4984:1995. When incorporated with adequate quantity of carbon black as specified in clause 5.2.3 of IS:4984:1995, will meet the requirements of the designation PE-EW-C45-T003 mentioned in the clause 5.2 of IS:4984:1995.

Pipe made from 46GP003 grade passes the Internal Pressure Creep Rupture Test when tested with 5.5 MPa induced stress at 80°C for 165 hrs and with 5.7 MPa induced stress at 80°C for 48 hrs as per clause 8.1 of IS 4984, thereby meeting the requirements of PE100 grade as per IS: 4984.

FOOD CONTACT APPLICATIONS :
This grade shall meet the requirements of Indian Standard IS-10146-1982 on "Polyethylene for its safe use in contact with food stuffs, pharmaceuticals and drinking water". It shall also conforms to the positive list of constituents as approved in IS:10141:1982. The grade shall comply with FDA regulation: CFR title 21, 177.1520, Olefin polymer. The level of antioxidant in 46GP003 is not more than 0.3% by mass of the resin.

General Information
Features	Compliance of Food Exposure
Uses	Piping system
Agency Ratings	FDA 21 CFR 177.1520 PPI PE-100
Appearance	Natural color
Forms	Particle
Processing Method	Pipeline extrusion molding Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.946	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg	0.10	g/10 min	ASTM D1238
190°C/5.0 kg	0.30	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (Compression Molded, F50)	> 1000	hr	ASTM D1693

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, Compression Molded)	27.5	MPa	ASTM D638
Tensile Elongation ²(Break, Compression Molded)	600	%	ASTM D638
Flexural Modulus ³(Compression Molded)	850	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (Compression Molded)	No Break		ASTM D256

Additional Information
Thermal Stability, ASTM D3895, 200°C: >30 minTensile Elongation at Break, ASTM D 638, Type IV: >600%Melt Mass - Flow Rate, ASTM D1238, 190°C/2.16 kg: < 0.1 g/10 min

Note Message
1 .	Type 4
2 .	Type 4
3 .	Type 4

Resin Grade	Manufacturer	Category	Trademark
MALEX 01EFR002 - 5230	AD majoris	PC	MALEX
Vibrathane® 8094	Chemtura	PUR-Ester/MDI	Vibrathane®
YUCLAIR® FT811	SK Global Chemical	LLDPE	YUCLAIR®
NEXUS PP RPP2C	Nexus Resin Group, LLC.	PP Random Copolymer	NEXUS PP
LNP™ THERMOCOMP™ LX03447 compound	SABIC Innovative Plastics	PEEK	LNP™ THERMOCOMP™