Order Products : sales@su-jiao.com
VESTOSINT® 1121 colored
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Evonik Industries AG |
| Trademark: | VESTOSINT® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bGMHFu_VESTOSINT-1121-colored.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| VESTOSINT 1121 colored is a polyamide 12 powder suitable for all-purpose fluidized bed coating. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1(23°C) | 1.02 | g/cm³ | ISO 1183 |
| Apparent Density | > 0.44 | g/cm³ | ISO 60 |
| Water Absorption | ISO 62 | ||
| Saturation, 100°C 2 | 1.9 | % | |
| Saturation, 23°C 3 | 1.3 | % | |
| Equilibrium, 23°C, 50% RH | 0.50 | % | |
| Particle Size Distribution | ISO 4610 | ||
| < 32.0 µm 4 | < 3.0 | wt% | |
| < 100.0 µm | > 45.0 | wt% | |
| < 250.0 µm | 100.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 75 | ISO 868 | |
| Ball Indentation Hardness 5 | 90.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 43.0 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | ||
| Yield | 6.0 | % | |
| Break | > 100 | % | |
| Taber Abrasion Resistance (100 Cycles, 500 g, CS-17 Wheel) | < 1.00 | mg | ASTM D1242 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 176 | °C | ISO 3146 |
| CLTE - Flow (23 to 55°C) | 1.1E-4 | cm/cm/°C | ISO 11359-2 |
| Specific Heat | 2350 | J/kg/°C | DIN 53765 |
| Thermal Conductivity | 0.23 to 0.29 | W/m/K | DIN 52612 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+14 | ohms·cm | IEC 60093 |
| Electric Strength 6 | 90 | kV/mm | IEC 60243-1 |
| Note Message | |
|---|---|
| 1 . | Values from 300 µm foils of unpigmented VESTOSINT |
| 2 . | Immersion |
| 3 . | 96%RH |
| 4 . | The value can reach 4% with effect colors |
| 5 . | H30 |
| 6 . | K20/P50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ASTALAC™ ASA 305 | Marplex Australia Pty. Ltd. | ASA | ASTALAC™ |
| Flexalloy® 9300-65 | Teknor Apex Company | PVC Elastomer | Flexalloy® |
| Dynacom 401-G15 | Dynachem Co. Ltd. | Nylon 6 | Dynacom |
| Sylvin 8280-80 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| LEXAN™ 103 resin | SABIC Innovative Plastics | PC | LEXAN™ |
