Order Products : sales@su-jiao.com
MTM® 110 series
| Category: | TS, Unspecified , Thermoset, Unspecified |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | MTM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bFcVSu_MTM-110-series.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MTM110 series prepregs are high temperature resistant, inherently flame-retardant, cyanate ester matrices suitable for initial cure at 135°C (275°F). After a suitable post-cure, the glass transition temperature can be increased to a maximum of 330°C (626°F), thus allowing components to withstand short duration thermal spikes up to this temperature. MTM110 series autoclave processing prepregs have been specially developed for applications where extended room temperature out life is important. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity 1 | 1.28 | g/cm³ |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature | |||
| -- 2 | 145 | °C | |
| -- 3 | 330 | °C |
| Note Message | |
|---|---|
| 1 . | Cured resin |
| 2 . | DMA E' onset Tg, 3 hours at 135°C (275°F), dry |
| 3 . | DMA E' onset Tg, 2 hours at 300°C (572°F), dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® BX10BK6660 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| ESPOLEX 820 | Sumitomo Chemical America, Inc. | TPO (POE) | ESPOLEX |
| LUVOCOM® 1850-7581 | Lehmann & Voss & Co. | PBT | LUVOCOM® |
| MAJORIS G474 | AD majoris | PP, Unspecified | MAJORIS |
| Medalist® MD-50293 | Teknor Apex Company | TPE | Medalist™ |
