Order Products : sales@su-jiao.com
LNP™ LUBRICOMP™ WI001 compound
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | SABIC Innovative Plastics Europe |
| Trademark: | LNP™ LUBRICOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bDqeAi_LNPLUBRICOMPWI001compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP LUBRICOMP WI001 is a compound based on PBT containing 2% Silicone. Added feature of this grade is: Wear Resistant. Also known as: LNP* LUBRICOMP* Compound WL-4410 Product reorder name: WI001 |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 24 hours | 2.0 - 4.0 | % | ASTM D955 |
| Transverse flow : 24 hours | 2.0 - 4.0 | % | ASTM D955 |
| Water Absorption | |||
| 24 hr, 50% RH | 0.060 | % | ASTM D570 |
| Equilibrium, 23°C, 50% RH | 0.090 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 2720 | MPa | ASTM D638 |
| -- | 2550 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Yield 2 | 50.0 | MPa | ASTM D638 |
| Yield | 53.0 | MPa | ISO 527-2/5 |
| Fracture 3 | 46.0 | MPa | ASTM D638 |
| Fracture | 45.0 | MPa | ISO 527-2/5 |
| Tensile Elongation | |||
| Yield 4 | 2.8 | % | ASTM D638 |
| Yield | 3.0 | % | ISO 527-2/5 |
| Fracture 5 | 51 | % | ASTM D638 |
| Fracture | 32 | % | ISO 527-2/5 |
| Flexural Modulus | |||
| 50.0mm span 6 | 2620 | MPa | ASTM D790 |
| -- 7 | 2530 | MPa | ISO 178 |
| Flexural Stress | |||
| -- | 81.0 | MPa | ISO 178 |
| Yield, 50.0mm span 8 | 88.0 | MPa | ASTM D790 |
| Coefficient of Friction | ASTM D3702 Modified | ||
| With self-dynamics | 0.31 | ASTM D3702 Modified | |
| With Self-Static | 0.19 | ASTM D3702 Modified | |
| Wear Factor | ASTM D3702 Modified | ||
| Ring | 0.00 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified |
| Washer | 136 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 5.0 | J/m | ASTM D256 |
| 23°C 9 | 47 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 940 | J/m | ASTM D4812 |
| 23°C 10 | 62 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact | |||
| 23°C, Total Energy | 10.0 | J | ASTM D3763 |
| -- | 8.00 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, unannealed, 3.20mm | 202 | °C | ASTM D648 |
| 0.45 MPa, unannealed, 64.0mm span 11 | 156 | °C | ISO 75-2/Bf |
| 1.8 MPa, unannealed, 3.20mm | 61.0 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 64.0mm span 12 | 56.0 | °C | ISO 75-2/Af |
| Linear thermal expansion coefficient | ASTM D696 | ||
| Flow : -30 to 30°C | 8.5E-5 | cm/cm/°C | ASTM D696 |
| Lateral : -30 to 30°C | 8.8E-5 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 221 - 232 | °C | |
| Middle Temperature | 243 - 254 | °C | |
| Front Temperature | 260 - 271 | °C | |
| Processing (Melt) Temp | 238 - 266 | °C | |
| Mold Temperature | 82.2 - 98.9 | °C | |
| Back Pressure | 0.172 - 0.344 | MPa | |
| Screw Speed | 30 - 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | Type 1, 5.0 mm/min |
| 3 . | Type 1, 5.0 mm/min |
| 4 . | Type 1, 5.0 mm/min |
| 5 . | Type 1, 5.0 mm/min |
| 6 . | 1.3 mm/min |
| 7 . | 2.0 mm/min |
| 8 . | 1.3 mm/min |
| 9 . | 80*10*4 |
| 10 . | 80*10*4 |
| 11 . | 80*10*4 mm |
| 12 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shanghai Potomer SG6 | Shanghai Potomer International Trade Co., Ltd. | PVC, Unspecified | Shanghai Potomer |
| TEREZ PA 6.6 7500 GF 20 GK 10 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Generic PP, Unspecified - Wood Fiber | Generic | PP, Unspecified | Generic |
| Eltex® P KS407 | INEOS Olefins & Polymers Europe | PP Random Copolymer | Eltex® P |
| HiFill® PA6/6 1550 GF40 | Techmer Engineered Solutions | Nylon 66 | HiFill® |
