Order Products : sales@su-jiao.com
Spartech Polycom SCR1-5020
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Spartech Polycom |
| Trademark: | Spartech |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bDSNw8_Spartech-Polycom-SCR1-5020.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Spartech SCR1-5020 is a high gloss, high viscosity, ABS resin for injection molding. It is heat stabilized and lubricated for good processing characteristics, and it exhibits good impact and chemical resistance. With the benefit of low moisture absorption, ABS can be used in a variety of environments. Being a very versatile product, SCR1-5020 can be used for industrial, transportation, sporting goods and electrical/electronic applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 1.2 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 41.4 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 2280 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 68.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 370 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 82.2 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.57 mm, NC) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 87.8 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 210 - 240 | °C | |
| Middle Temperature | 215 - 245 | °C | |
| Front Temperature | 220 - 250 | °C | |
| Nozzle Temperature | 218 - 260 | °C | |
| Processing (Melt) Temp | 218 - 260 | °C | |
| Mold Temperature | 43.3 - 65.6 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RJM SN601G30-F | RJM International, Inc. | Nylon 66 | RJM |
| VENYL UN002 - 5321 | AD majoris | Nylon 66 | VENYL |
| Texalan® 2 Series 265A | Austin Novel Materials Co. Ltd. | TPU-Polyester | Texalan® 2 Series |
| DynaChar™ 2321 | Polymer Dynamix | PEBA-Ether | DynaChar™ |
| Durethan® BC 700 HTS DUSXBL 900116 | LANXESS GmbH | Nylon 6 | Durethan® |
