Order Products : sales@su-jiao.com
LNP™ THERMOCOMP™ WX05456 compound
| Category: | Polyester, TP , Thermoplastic Polyester |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | LNP™ THERMOCOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bAaHPy_LNP-THERMOCOMP-WX05456-compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP THERMOCOMP WX05456 is a compound based on PBT containing Mineral. Also known as: LNP* THERMOCOMP* Compound 9760 Product reorder name: WX05456 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.55 | g/cm³ | ASTM D792 |
| -- | 1.54 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ASTM D955, ISO 294-4 | ||
| Flow : 24 hr | 1.5 | % | |
| Across Flow : 24 hr | 1.5 | % | |
| Water Absorption | |||
| 24 hr, 50% RH | 0.050 | % | ASTM D570 |
| Equilibrium, 23°C, 50% RH | 0.070 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 4230 | MPa | ASTM D638 |
| -- | 4650 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Break | 48.3 | MPa | ASTM D638 |
| Break | 47.0 | MPa | ISO 527-2 |
| Tensile Elongation | |||
| Break | 1.8 | % | ASTM D638 |
| Break | 1.4 | % | ISO 527-2 |
| Flexural Modulus | |||
| -- | 4390 | MPa | ASTM D790 |
| -- | 4200 | MPa | ISO 178 |
| Flexural Strength | |||
| -- | 90.3 | MPa | ASTM D790 |
| -- | 88.2 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 27 | J/m | ASTM D256 |
| 23°C 2 | 2.7 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 200 | J/m | ASTM D4812 |
| 23°C 3 | 15 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact | |||
| 23°C, Energy at Peak Load | 7.23 | J | ASTM D3763 |
| -- | 0.610 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, 3.20 mm | 172 | °C | ASTM D648 |
| 0.45 MPa, Unannealed, 64.0 mm Span 4 | 163 | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed, 3.20 mm | 71.1 | °C | ASTM D648 |
| 1.8 MPa, Unannealed, 64.0 mm Span 5 | 82.0 | °C | ISO 75-2/Af |
| CLTE | ASTM E831, ISO 11359-2 | ||
| Flow : -40 to 40°C | 5.8E-5 | cm/cm/°C | |
| Transverse : -40 to 40°C | 6.7E-5 | cm/cm/°C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm, Testing by SABIC) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 to 149 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 232 to 243 | °C | |
| Middle Temperature | 249 to 260 | °C | |
| Front Temperature | 266 to 277 | °C | |
| Processing (Melt) Temp | 249 to 277 | °C | |
| Mold Temperature | 82.2 to 93.3 | °C | |
| Back Pressure | 0.172 to 0.344 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 80*10*4 |
| 3 . | 80*10*4 |
| 4 . | 80*10*4 mm |
| 5 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Clariant Acetal HP-MF1 | Clariant Corporation | Acetal (POM) Homopolymer | Clariant Acetal |
| Durethan® DP AKV 30 HR EF 901510 | LANXESS Asia/Pacific | Nylon 66 | Durethan® |
| Elastron® G G101.A30.N | Elastron USA, Inc. | SEBS | Elastron® G |
| INVISION™ GX 5187G3 | A. Schulman Inc. | TPE | INVISION™ |
| LUVOCOM® 1/GF/20/TF/10/SI/2/BK | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
