Order Products : sales@su-jiao.com
MAJORIS IB910
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | b1fBi1_MAJORIS-IB910.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
IB910 is a natural, mineral filled polypropylene compound intended for injection moulding. The product is available in natural (IB910) and black (IB910 - 8229) but other colours can be supplied on request. IB910 has been developed for applications where high density, good surface finish and good flow properties are necessary. APPLICATIONS High density products, such as:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 3.00 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/5.0 kg) | 50 | g/10 min | ISO 1133 |
| Molding Shrinkage (2.00 mm) | 0.30 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 6800 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 24.0 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 6550 | MPa | ISO 178 |
| Flexural Stress | 44.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 1.5 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | 6.0 | kJ/m² | ISO 179/1eU |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 220 - 270 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silopren® LSR 2650 | Momentive Performance Materials Inc. | Silicone Rubber, LSR | Silopren® |
| Tarnamid® T- 27 GF35 P5 | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| ANYPOL SE-2000 | SH Energy & Chemical | PS (EPS) | ANYPOL |
| Kynar Flex® 705 | Arkema | PVDF | Kynar Flex® |
| INEOS EBA B26E730 | INEOS Olefins & Polymers Europe | EBA | INEOS EBA |
