Order Products : sales@su-jiao.com
Glastic® 1461
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Glastic Corporation |
| Trademark: | Glastic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | awnkEY_Glastic-1461.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Glastic 1461 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 1461 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 1461 are higher than those of conventional plastic insulators. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| UL File Number |
|
| Forms |
|
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 20.7 | MPa | ASTM D638 |
| Compressive Strength | 414 | MPa | ASTM D695 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Arc Resistance | 180 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information |
|---|
| Cantilever Strength: 3500 in/lbsTorque Strength: 50 ft/lbsHeight Tolerance: .015Creep Resistance: 3-1/4 inchTrack Resistance: 600 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu Elastomer KE-561U | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| Ultramid® C40LX 01 | BASF Corporation | Nylon 66/6 | Ultramid® |
| ARBOBLEND® V3 | TECNARO GmbH | Biodeg Polymers | ARBOBLEND® |
| Arnite® TV4 230 SF | DSM Engineering Plastics | PBT | Arnite® |
| INCOLOR PSU | Infinity LTL Engineered Compounds | PSU | INCOLOR |
