Order Products : sales@su-jiao.com

Purgex™ 3057 Plus

Category:	PE, Unspecified , Polyethylene
Manufacturer:	Neutrex, Inc.
Trademark:	Purgex™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	auiO1y_Purgex-3057-Plus.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Blend, polyethylene, 3% glass, and FDA-approved active component Non-toxic, non-abrasive and safe Ready to use and easy to remove Temperature Range: Operating temperature range of 300°F to 600°F (149°C to 316°C) Applications: PURGEX 3057 Plus thoroughly removes all types of colorants and engineering resins, such as nylon and polycarbonate, from the barrel, screw, and nozzle of thermoplastic resin injection molding, extrusion, or blow molding equipment, as well as hot runner systems. PURGEX 3057 Plus includes a modified polyethylene for higher temperature resins. PURGEX 3057 Plus can be used for rapid turnaround on color and material changes with challenging resins such as LCP, PBT, and PPO, on alloys such as PC/ABS, and is recommended for glass- or mineral-filled applications. This blend operates up to 600°F (316°C) with a five minute soak, or higher temperatures without a soak.

Message

Blend, polyethylene, 3% glass, and FDA-approved active component

Non-toxic, non-abrasive and safe

Ready to use and easy to remove

Temperature Range:

Operating temperature range of 300°F to 600°F (149°C to 316°C)

Applications:

PURGEX 3057 Plus thoroughly removes all types of colorants and engineering resins, such as nylon and polycarbonate, from the barrel, screw, and nozzle of thermoplastic resin injection molding, extrusion, or blow molding equipment, as well as hot runner systems.

PURGEX 3057 Plus includes a modified polyethylene for higher temperature resins. PURGEX 3057 Plus can be used for rapid turnaround on color and material changes with challenging resins such as LCP, PBT, and PPO, on alloys such as PC/ABS, and is recommended for glass- or mineral-filled applications. This blend operates up to 600°F (316°C) with a five minute soak, or higher temperatures without a soak.

General Information
Uses	Cleaning compound
Processing Method	Extrusion Injection molding

Injection instructions
Empty barrel of production resin. Add PURGEX 3057 Plus to the hopper (a minimum of 1.5 times the injection capacity). Purge the barrel until PURGEX exits the nozzle. Soak five minutes at processing temperature with barrel full and screw in forward position. Purge barrel to empty. Follow with next production resin, rinsing PURGEX from machine. Resume molding.

Extrusion instructions
Empty extruder. Remove screen. Seal vent. Fill extruder with PURGEX 3057 Plus. Make certain extruder is full and PURGEX is exiting the nozzle as a foaming material. Soak five minutes at processing temperature. Add the next resin to be extruded and remove all PURGEX from the extruder. When it appears that PURGEX has been completely removed, replace the screen, open the vent, and commence production.

Extrusion instructions

Empty extruder. Remove screen. Seal vent. Fill extruder with PURGEX 3057 Plus. Make certain extruder is full and PURGEX is exiting the nozzle as a foaming material. Soak five minutes at processing temperature. Add the next resin to be extruded and remove all PURGEX from the extruder. When it appears that PURGEX has been completely removed, replace the screen, open the vent, and commence production.

Resin Grade	Manufacturer	Category	Trademark
Mylar® WC (500 guage)	DuPont Teijin Films U.S.	PET	Mylar®
Durethan® BG 30 X FN01 000000	LANXESS Corporation	Nylon 6	Durethan®
KMI PBS KM802A	KMI Group Inc.	PBS	KMI PBS
Karina IVORY PVC COMPOUND 751-35/1-B-IS	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
Sylvin 7833-90 Grey 9465	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin