VESTAMID® Terra DS18 natural color

Category:	Nylon 1010 , Polyamide 1010
Manufacturer:	Evonik Industries AG
Trademark:	VESTAMID® Terra
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	auVw8S_VESTAMID-Terra-DS18-natural-color.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Medium viscosity, polyamide 1010 VESTAMID®Terra DS18 natural color is a medium viscosity PA 1010 basic polymer. VESTAMID Terra DS18 is semi-crystalline, which is the reason for its high mechanical resistance and chemical stability. It absorbs only little water. As a result its mechanical properties vary little when exposed to changing environmental humidity, and the material features a high dimensional stability. VESTAMID®Terra DS18 can be used to manufacture films with good transparency. The high melting point of VESTAMID Terra DS18 compounds results in a high heat deflection temperature that can be advantageous for some applications. VESTAMID®Terra DS18 occupies a position between the high-performance long-chain polyamides such as PA 12 and PA 1212 and the standard polyamides PA 6 and PA 66, which have a shorter chain length. Because of its chemical and physical properties, and the plant origin of its monomers, VESTAMID Terra DS18 is an interesting addition to conventional longer-chain polyamides, and it also meets the growing demand for materials made from renewable raw materials. VESTAMID® Terra is a group of new polyamides, the monomers for which are based entirely or partly on renewable raw materials. VESTAMID® Terra DS is the polycondensation product of 1,10-decamethylene diamine (D) and 1,10-decanedioic acid (sebacic acid—S). Because both monomers are extracted from castor oil, VESTAMID® Terra DS is based on natural, renewable resources up to 100%. Global Warming Potential (GWP) 2.8kg CO2 by Evonik, PE International.

Message

Medium viscosity, polyamide 1010

VESTAMID®Terra DS18 natural color is a medium viscosity PA 1010 basic polymer. VESTAMID Terra DS18 is semi-crystalline, which is the reason for its high mechanical resistance and chemical stability. It absorbs only little water. As a result its mechanical properties vary little when exposed to changing environmental humidity, and the material features a high dimensional stability.

VESTAMID®Terra DS18 can be used to manufacture films with good transparency. The high melting point of VESTAMID Terra DS18 compounds results in a high heat deflection temperature that can be advantageous for some applications.

VESTAMID®Terra DS18 occupies a position between the high-performance long-chain polyamides such as PA 12 and PA 1212 and the standard polyamides PA 6 and PA 66, which have a shorter chain length.

Because of its chemical and physical properties, and the plant origin of its monomers, VESTAMID Terra DS18 is an interesting addition to conventional longer-chain polyamides, and it also meets the growing demand for materials made from renewable raw materials.

VESTAMID® Terra is a group of new polyamides, the monomers for which are based entirely or partly on renewable raw materials.

VESTAMID® Terra DS is the polycondensation product of 1,10-decamethylene diamine (D) and 1,10-decanedioic acid (sebacic acid—S). Because both monomers are extracted from castor oil, VESTAMID® Terra DS is based on natural, renewable resources up to 100%.

Global Warming Potential (GWP) 2.8kg CO2 by Evonik, PE International.

General Information
Features	Good Dimensional Stability High Clarity Low to No Water Absorption Renewable Resource Content Semi Crystalline
Uses	Film
Appearance	Natural Color

Physical	Nominal Value	Unit	Test Method
Density (23°C)	1.05	g/cm³	ISO 1183
Water Absorption (Saturation, 23°C)	1.8	%	Internal Method
Viscosity Number	180	cm³/g	ISO 307

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1700	MPa	ISO 527-2
Tensile Stress (Yield)	54.0	MPa	ISO 527-2
Tensile Strain			ISO 527-2
Yield	5.0	%
Break	> 50	%

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-30°C, Complete Break	7.0	kJ/m²
23°C, Complete Break	7.0	kJ/m²
Charpy Unnotched Impact Strength			ISO 179/1eU
-30°C	No Break
23°C	No Break

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature
--	196	°C	ISO 306/A
--	171	°C	ISO 306/B
Melting Temperature ¹	200	°C	ISO 11357-3

Additional Information	Nominal Value	Unit
Renewable Carbon Conent	100	%

Note Message
1 .	2nd Heating

Resin Grade	Manufacturer	Category	Trademark
SILVER® PC2510.HF	Guangdong Silver Age Sci & Tech. Co., Ltd	PC+ABS	SILVER®
VisiJet® FTX Green	3D Systems	Unspecified	VisiJet®
ISOTAL™ C9	SABIC Innovative Plastics Europe	Acetal (POM) Copolymer	ISOTAL™
OmniPro™ CPP GRC10	OMNI Plastics, LLC	PP Copolymer	OmniPro™
Plenco 03509 (Transfer)	Plastics Engineering Co.	Phenolic	Plenco