Order Products : sales@su-jiao.com

ESENTTIA 20H10NA

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Polipropileno del Caribe S.A.
Trademark:	ESENTTIA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	apGOaX_ESENTTIA-20H10NA.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
Characteristics: Control reologhy high melt flow rate Homopolymer polypropylene, easy mold filling, good stiffness/impact balance,, with nucleant and antistatic additives. Recommended for: Injection molding of thin wall rigid containers, fast cycle time, cover electrical appliances, closures, general purpose injection molding applications.

General Information
Additive	Antistatic Nucleating Agent
Features	Antistatic Controlled Rheology Fast Molding Cycle Food Contact Acceptable General Purpose High Flow High Rigidity Homopolymer Nucleated
Uses	Appliances Closures General Purpose Thin-walled Containers
Agency Ratings	EC 1907/2006 (REACH) EC 1935/2004 EC 2023/2006 EU 10/2011 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(b) FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) ¹(230°C/2.16 kg)	22	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield, 3.20 mm, Injection Molded)	35.9	MPa	ASTM D638
Tensile Elongation ³(Yield, 3.20 mm, Injection Molded)	9.0	%	ASTM D638
Flexural Modulus - 1% Secant ⁴(3.20 mm, Injection Molded)	1590	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	37	J/m	ASTM D256A

Note Message
1 .	Procedure B
2 .	Type I, 50 mm/min
3 .	Type I, 50 mm/min
4 .	Type I, 1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
tefanyl® VR VRGR 321	Mitsubishi Chemical Performance Polymers, Inc.	PVC, Rigid	tefanyl® VR
Trademark PE LDVA1925.4B	Trademark Plastics Corporation	LDPE+EVA	Trademark PE
BMC A30-3021	Bulk Molding Compounds, Inc.	Polyester, TS	BMC
ANYPOL SE-160LL	SH Energy & Chemical	PS (EPS)	ANYPOL
LNP™ STAT-KON™ DX02728C compound	SABIC Innovative Plastics	PC	LNP™ STAT-KON™