Category: | ASA , Acrylonitrile Styrene Acrylate |
Manufacturer: | Polykemi AB |
Trademark: | POLYasa |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | aoq99E_POLYasa-2410F.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
High flow |
General Information | |
---|---|
Features |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 1.04 | g/cm³ | ISO 1183 |
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 24 | g/10 min | ISO 1133 |
Molding Shrinkage | ISO 294-4 | ||
Across Flow | 0.50 to 0.70 | % | |
Flow | 0.50 to 0.70 | % |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress | 45.0 | MPa | ISO 527-2 |
Tensile Strain (Yield) | 6.0 | % | ISO 527-2 |
Flexural Modulus (23°C) | 2600 | MPa | ISO 178 |
Flexural Stress | 87.0 | MPa | ISO 178 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Charpy Notched Impact Strength | ISO 179 | ||
-20°C | 5.0 | kJ/m² | |
23°C | 10 | kJ/m² |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Heat Deflection Temperature 1 | |||
0.45 MPa, Unannealed | 96.0 | °C | ISO 75-2/B |
1.8 MPa, Unannealed | 84.0 | °C | ISO 75-2/A |
Vicat Softening Temperature | |||
-- | 103 | °C | ISO 306/A50 |
-- | 94.0 | °C | ISO 306/B50 |
Flammability | Nominal Value | Unit | Test Method |
---|---|---|---|
Flame Rating (1.60 mm) | HB | UL 94 | |
Glow Wire Ignition Temperature (2.00 mm) | 650 | °C | IEC 60695-2-13 |
Note Message | |
---|---|
1 . | 120°C/hr |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Xuchuan XCBD-300 | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
Niuk 40RNG30 | Shanghai Niuk New Plastic Technology Co., Ltd. | Nylon 6 | Niuk |
OCTAL PET WG 02 | OCTAL Holding & Co. | PET | OCTAL PET |
Flontech® FT-900-D | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
SQUARE® LIM1989-50A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |