Order Products : sales@su-jiao.com
Stirol UPM-0612 L (extra)
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | JSC CONCERN STIROL |
| Trademark: | Stirol |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ag42BW_Stirol-UPM-0612-L-extra-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UPM-0612 L is for manufacturing of goods for technical purpose and goods of national consumption. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1 | 4.0 to 8.0 | g/10 min | ISO 1133 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | < 0.10 | % | ISO 62 |
| Bound Styrene | < 0.2 | % | |
| Purity 2 | 10.0 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 24.5 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 18 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | > 6.5 | kJ/m² | ISO 179 |
| Note Message | |
|---|---|
| 1 . | ±10% |
| 2 . | Disc surface should be clean. It is allowed one insertion with diameter 0,2-0,3 mm at the surfaces of disks converting to area, cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUMILITE® EL-3800E | Sumitomo Bakelite Co., Ltd. | Epoxy | SUMILITE® |
| Adell Polyamide BD-30 | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| Celstran® PP-GF30-02 AD 3019 | Celanese Corporation | PP, Unspecified | Celstran® |
| Ethylplus 600 | Fainplast Compounds S.r.l | LDPE | Ethylplus |
| Foam-It® 8 | Smooth-On, Inc | PUR, Unspecified | Foam-It® |
