Order Products : sales@su-jiao.com
Genestar™ TA104
| Category: | Nylon 9T , Polyamide 9T |
| Manufacturer: | Kuraray Co., Ltd. |
| Trademark: | Genestar™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aeScpU_Genestar-TA104.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Genestar™ TA104 is a reinforced injection grade. Main features of TA104 are;
Examples of application are;
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.61 | g/cm³ | ISO 1183 |
| Molding Shrinkage | |||
| Flow : 1.00 mm | 1.2 | % | |
| Across Flow : 1.00 mm | 1.1 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 50.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1.4 | % | ASTM D638 |
| Flexural Modulus | 4500 | MPa | ASTM D790 |
| Flexural Strength | 83.0 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 192 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | UL 94 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Bar Flow Length 1(320°C, 500.0 µm) | 5.40 | cm |
| Note Message | |
|---|---|
| 1 . | 750kgf |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SWANCOR Epoxy 905-N | SWANCOR IND. CO., LTD. | Epoxy | SWANCOR Epoxy |
| Vyncolit® RX®1366FR-P | Vyncolit N.V. | DAP | Vyncolit® |
| Adell PE KR-18 | Adell Plastics, Inc. | HDPE | Adell PE |
| ExxonMobil™ AP3N | ExxonMobil Chemical | PP Impact Copolymer | ExxonMobil™ |
| KIBILAC® PW-978B | CHI MEI CORPORATION | ASA | KIBILAC® |
