Extir® EH 3000

Category: PS (EPS) , Expanded Polystyrene
Manufacturer: Versalis S.p.A.
Trademark: Extir®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: adAtn9_Extir-EH-3000.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Extir EH 3000 is an expandable polystyrene in the form of spherical beads of medium particle size, with a low pentane content as blowing agent. Extir does not contain CFC or HCFC. Extir EH 3000 is used for the very fast cycle production of shape mouldings and block moulding with a medium to very high density. It is also characterised by very short maturing time, even at very high density, excellent moulding processability, good fusion, good surface finishing and a very good dimensional stability.

Extir EH 3000 is a very fast cycling grade used for production of moulded items with wall sections greater than 8 mm and also of skin moulded articles. It can also be used for the production of medium / high density blocks.
Finished products exhibit high fusion, high resistance to impact / mechanical stress, and an outstanding dimensional stability. Extir EH 3000 is suitable for the production of food packaging and for food contact applications.

Typical applications are:
  • industrial and protection packaging
  • internal shells for motorcycle and bicycle crash helmets
  • containers and loaders for automated manufacturing in the electronics sector
  • returnable packaging and pallets
  • medium-high density blocks for thermal insulation
General Information
Additive
  • Blowing Agent 2
Features
  • Expandable
  • Fast Molding Cycle
  • Food Contact Acceptable
  • Good Dimensional Stability
  • Good Processability
  • Good Surface Finish
  • High Impact Resistance
  • High Strength
  • Thermally Insulating
Uses
  • Containers
  • Food Packaging
  • Industrial Applications
  • Packaging
  • Pallets
  • Safety Helmets
  • Sporting Goods
Agency Ratings
  • EU 90/128/EEC
Forms
  • Spheres
PhysicalNominal ValueUnit
Density 0.0200 to 0.0800g/cm³
Apparent Density
    -- 10.02g/cm³
    -- 0.59 to 0.63g/cm³
Particle Size 600 to 1100µm
Note Message
1 .on a continuous pre-expander after one expansion
Resin Grade Manufacturer Category Trademark
Radilon® A RV250LW 333 NER 4807 Radici Plastics Nylon 66 Radilon®
RTP 1099 X 108836 RTP Company PBT RTP
ALCOM® PC 740/4 BL1411-07LD ALBIS PLASTIC GmbH PC ALCOM® PC
CP PRYME® Polycarbonate PC100RUL-18M BK Chase Plastics Services Inc. PC CP PRYME® Polycarbonate
KOPLA PC KBG1060 KOPLA Co., Ltd. PBT KOPLA PC