Order Products : sales@su-jiao.com

Ultra Low Outgassing™ SCV2-2590

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	Ultra Low Outgassing™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	abGTnZ_Ultra-Low-Outgassing-SCV2-2590.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Low/High Temperature, Primed Lap Shear 250 psi (1.7 MPa)

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: Low/High Temperature, Primed Lap Shear 250 psi (1.7 MPa)

General Information
Features	Low to No Outgassing
Uses	Aerospace Applications Electrical/Electronic Applications
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermal	Nominal Value	Unit
CLTE - Flow	4.9E-4	cm/cm/°C

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 10
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	Clear/Transparent
Density	1.04	g/cm³
Viscosity ¹	3.5	Pa·s
Curing Time (65°C)	4.0	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	45
Lap Shear Strength ²	1.72	MPa
Tensile Strength	3.28	MPa
Tensile Elongation at Break	85	%

Note Message
1 .	Part A
2 .	Primed with CF1-135

Resin Grade	Manufacturer	Category	Trademark
SCHULAMID® 6 GBF 3010 H	A. Schulman Europe	Nylon 6	SCHULAMID®
TEREZ PA 6.6 7500 TF 20 GF 30	TER HELL PLASTIC GMBH	Nylon 66	TEREZ PA 6.6
Escorene™ Ultra LD 720 Series	ExxonMobil Chemical	EVA	Escorene™ Ultra
INVISION™ VX 5060UI	A. Schulman Inc.	TPV	INVISION™
Pexidan® L/T	Saco Polymers	HDPE	Pexidan®