Order Products : sales@su-jiao.com

PPO™ 640 resin

Category:	PPE+PS , Polyphenylene Ether + PS
Manufacturer:	SABIC Innovative Plastics
Trademark:	PPO™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	aWDAVD_PPO-640-resin.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PPO* 640 resin is a medium-high molecular weight polymer based on Polyphenylene Ether (PPE). PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO* resin can be used to improve properties like Heat Distortion and Creep Resistance. It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: Poly (2,6-dimethyl-, 1,4-phenylene ether) (PPE) Formula: (C8H8O)n Regulatory Status: Complies with the FDA regulation 21CFR 177..2460. Also complies with EU Directive 2002/72/EC.

Message

PPO* 640 resin is a medium-high molecular weight polymer based on Polyphenylene Ether (PPE). PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO* resin can be used to improve properties like Heat Distortion and Creep Resistance. It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: Poly (2,6-dimethyl-, 1,4-phenylene ether) (PPE) Formula: (C8H8O)n Regulatory Status: Complies with the FDA regulation 21CFR 177..2460. Also complies with EU Directive 2002/72/EC.

General Information
Features	Hydrolytically Stable Medium Molecular Weight
Uses	Additive
Agency Ratings	EU 2002/72/EC FDA 21 CFR 177.2460
Forms	Powder

Physical	Nominal Value	Unit	Test Method
Density ¹	0.476	g/cm³	ISO 1183
D	2.80		Internal Method
Intrinsic Viscosity	0.40	dl/g	Internal Method
Mean Particle Size	200.0	µm	Internal Method
Mn	19900		Internal Method
Mw	56200		Internal Method
Phenolic End-group Content	890	ppm	Internal Method
Tg (half width)	216	°C	Internal Method

Additional Information	Nominal Value	Unit	Test Method
Toluene Content	< 1500	ppm	Internal Method

Note Message
1 .	Bulk Density

Resin Grade	Manufacturer	Category	Trademark
TechnoDur PBT 4 GF10 FR	TechnoCompound GmbH	PBT	TechnoDur
SUMILITE® EL-3800E	Sumitomo Bakelite Co., Ltd.	Epoxy	SUMILITE®
Sylvin 2924-65 White 1500	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
ULTEM™ EXUM0167 resin	SABIC Innovative Plastics	PEI	ULTEM™
Anjacom® R050/75S Black 91012	Almaak International GmbH	PC+ABS	Anjacom®