Order Products : sales@su-jiao.com
Sasol Polymers PE LT159 (Extrusion/Blow molding)
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Sasol Polymers |
| Trademark: | Sasol Polymers PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aRckrc_Sasol-Polymers-PE-LT159-Extrusion-Blow-molding-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features
Applications
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.75 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal CO-630, F50) | 2.30 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 12.0 | MPa | ASTM D638 |
| Fracture | 15.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 460 | % | ASTM D638 |
| Flexural Modulus | 343 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 98.0 | °C | ASTM D1525 |
| Extrusion instructions |
|---|
| LT159 can be processed on all standard extrusion blow moulding equipment. Processing temperatures need to be optimised with any equipment, but the melt temperature should be typically 150°C - 180°C. |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4087 TFE 15 | RTP Company | PPA | RTP |
| Telcar® OBC 4565A | Teknor Apex Company | TPE | Telcar® |
| Hypro® PPC-CC20 NATURAL | Entec Polymers | PP Copolymer | Hypro® |
| INSULCAST® 116 FR-FC-FS | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
| LUVOCOM® 3-7088-2 | Lehmann & Voss & Co. | Nylon 6 | LUVOCOM® |
