Order Products : sales@su-jiao.com
Ecomass® 2150TU85
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Ecomass Technologies |
| Trademark: | Ecomass® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aRW93W_Ecomass-2150TU85.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Ecomass®2150TU85 is a polyamide 66 (nylon 66) material that contains a tungsten filler. This product is available in North America and is processed by injection molding. Ecomass®The main features of 2150TU85 are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 5.60 | g/cm³ | Internal method |
| Molding Shrinkage | 0.90 - 1.0 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2900 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 43.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 9.0 | % | ISO 527-2 |
| Flexural Modulus | 2500 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 6.0 | kJ/m² | ISO 180/A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 79.4 | °C | |
| Drying Time - Desiccant Dryer | 2.0 | hr | |
| Drying Time, Maximum | 4.0 | hr | |
| Processing (Melt) Temp | 199 - 221 | °C | |
| Mold Temperature | 54.4 - 65.6 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.103 - 0.172 | MPa | |
| Screw Speed | 100 - 250 | rpm | |
| Clamp Tonnage | 3.4 - 5.5 | kN/cm² | |
| Cushion | 6.35 - 12.7 | mm | |
| Screw L/D Ratio | 20.0:1.0 | ||
| Screw Compression Ratio | 2.5:1.0 |
| Injection instructions |
|---|
| Pack (Hold) Pressure: 65 to 75% of Injection PressureFill Time: 1.0 to 2.0 in/secPack (Hold) Time: 10 to 15 secCooling Time: As requiredFeed Throat: CooledNozzle Type: Reverse TaperCheck Type: Free FlowDryer Dew Point: -20 to -40 °FMinimum Air Flow: 0.8 to 1.0 CFMInjection Pressure: As Required |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PREMIER™ A230-ST | Chomerics, div. of Parker Hannifin Corp. | PC+ABS | PREMIER™ |
| TECHNIACE® PAX-1439 | Nippon A&L Inc. | PC+ABS | TECHNIACE® |
| Plenco 08225 (Compression) | Plastics Engineering Co. | Polyester, TS | Plenco |
| TABOREN® PC 32 G 20 | SILON s.r.o. | PP Random Copolymer | TABOREN® |
| TECHNYL® AZ 536 V20 BLACK | Solvay Engineering Plastics | PPE+Nylon 66 | TECHNYL® |
