Order Products : sales@su-jiao.com
NYLOY® MS-0200B-3-H
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Nytex Composites Co., Ltd. |
| Trademark: | NYLOY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aLqrAu_NYLOYMS0200B3H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| NYLOY®MS-0200B-3-H is a polyamide 66 (nylon 66) material,. This product is available in North America or Asia Pacific region. The processing method is injection molding. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 76 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 53.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 30 | % | ASTM D638 |
| Flexural Modulus | 2060 | MPa | ASTM D790 |
| Flexural Strength | 85.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 240 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 | °C | |
| Drying Time | 1.0 | hr | |
| Rear Temperature | 270 | °C | |
| Middle Temperature | 280 | °C | |
| Nozzle Temperature | 290 | °C | |
| Mold Temperature | 80 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® HDB 501 | Marco Polo International, Inc. | HDPE | MARPOL® |
| ADEKA PR series | Adeka Corporation | PUR-Ether | ADEKA |
| Elastocon® 8058N | Elastocon TPE Technologies | TPE | Elastocon® |
| Hifax HSBMCB1158ACLS/2 | LyondellBasell Industries | TPO (POE) | Hifax |
| TECHNYL® C 216 V15 NATURAL | Solvay Engineering Plastics | Nylon 6 | TECHNYL® |
