Category: | Nylon, Unspecified , Polyamide |
Manufacturer: | Polymer Dynamix |
Trademark: | DynaStat® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | aGzDDv_DynaStat-EG1957.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Lubricated Antistatic Nylon Compound Features:
Applications:
|
General Information | |
---|---|
Additive |
|
Features |
|
Uses |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.10 to 1.15 | g/cm³ | ASTM D792 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength | ASTM D638 | ||
Yield | 32.4 | MPa | |
Break | 31.0 | MPa | |
Tensile Elongation | ASTM D638 | ||
Yield | 15 | % | |
Break | > 500 | % | |
Flexural Modulus | 586 | MPa | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact (23°C, 3.18 mm) | No Break | ASTM D256 |
Electrical | Nominal Value | Unit | Test Method |
---|---|---|---|
Surface Resistivity | 5.0E+6 to 8.0E+8 | ohms | ASTM D257 |
Volume Resistivity | 5.0E+6 to 8.0E+8 | ohms·cm | ASTM D257 |
Injection | Nominal Value | Unit | |
---|---|---|---|
Drying Temperature | 82.2 to 93.3 | °C | |
Drying Time | > 4.0 | hr | |
Rear Temperature | 221 to 249 | °C | |
Middle Temperature | 232 to 260 | °C | |
Front Temperature | 243 to 266 | °C | |
Nozzle Temperature | 243 to 266 | °C | |
Mold Temperature | 37.8 to 65.6 | °C | |
Injection Pressure | 2.07 to 10.3 | MPa | |
Injection Rate | Moderate-Fast | ||
Back Pressure | 0.00 | MPa | |
Screw Speed | 40 to 45 | rpm |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Torelina® A625H-L01 | Toray Resin Company | PPS | Torelina® |
Toraycon® 5201X10 | Toray Resin Company | PBT | Toraycon® |
TUFNYL® RGF 33 BLUE | SRF Ltd. | Nylon 66 | TUFNYL® |
DAI-EL™ G-701HBP | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
Hifax TRC 770P G64 Gray | LyondellBasell Industries | TPO (POE) | Hifax |