Order Products : sales@su-jiao.com
Boda BDF60C
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | Chenguang Fluoro & Silicone Elastomers Co., Ltd. |
| Trademark: | Boda |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aDVSuT_Boda-BDF60C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BDF60C is a medium viscosity curative incorporated fluoroelastomer copolymer. This grade is well suited for application where good process properties, rheological properties and low compression set are required. BDF60C can be compounded to meet the major fluoroelastomer specifications. BDF60C is a general purpose grade. It can be used for compression molding of O-rings and gaskets. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.80 | g/cm³ | |
| Mooney Viscosity (ML 1+10, 121°C) | 42 | MU | |
| Fluorine Content | 66 | % | |
| Solubility | LMW Ketones and esters |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| MH 1(177°C) | 2.15 | N·m | |
| ML 2(177°C) | 0.400 | N·m | |
| t'90 3(177°C) | 2.8 | min | |
| ts2 4(177°C) | 1.5 | min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness 5(Shore A) | 77 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 6(Yield) | 14.0 | MPa | ASTM D412 |
| Tensile Elongation 7(Break) | 200 | % | ASTM D412 |
| Compression Set (200°C, 70 hr) | 18 | % | ASTM D395B |
| Additional Information |
|---|
| Test Compound: Polymer: 100 MT Black (N990): 30 phr MgO: 3 phr Ca(OH)2: 6 phr Curing Condition: Press: 10 min at 170°C Oven: 24 hr at 230°C |
| Note Message | |
|---|---|
| 1 . | MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
| 2 . | MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
| 3 . | MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
| 4 . | MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
| 5 . | Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C |
| 6 . | Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C |
| 7 . | Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| REPOL® H080EY | Reliance Industries Limited | PP Homopolymer | REPOL® |
| SCHULAMID® 66 GF 15 H | A. Schulman Europe | Nylon 66 | SCHULAMID® |
| Tenite™ Butyrate 572E3720008, Clear, Trsp | Eastman Chemical Company | CAB | Tenite™ Butyrate |
| XANTAR® LDS 3734 | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® LDS |
| Chemlon® 235G | Teknor Apex Company (Chem Polymer) | Nylon 6 | Chemlon® |
