Order Products : sales@su-jiao.com
Alathon® XM4645
| Category: | HDPE Copolymer , High Density Polyethylene Copolymer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Alathon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aB3WST_Alathon-XM4645.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ALATHON XM 4645 is a high density copolymer for use in injection molding applications. It exhibits excellent impact, warp and environmental stress crack resistance. Typical applications for XM 4645 are consumer durables and 35, 65, and 95-gallon refuse carts. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.946 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 67 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 19.9 | MPa | ASTM D638 |
| Fracture | 22.7 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 11 | % | ASTM D638 |
| Flexural Modulus 3 | ASTM D790 | ||
| 1% secant | 745 | MPa | ASTM D790 |
| 2% secant | 621 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 62.2 | °C | ASTM D648 |
| Brittleness Temperature | -76.1 | °C | ASTM D746 |
| Additional Information |
|---|
| Spiral Flow, Equistar Test Method, 0.625 in insert, 1000 psi injection pressure, 440°F melt temperature: 8.8 in |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® B3G10 SI | BASF Corporation | Nylon 6 | Ultramid® |
| Ferro PE NPE00IA02NA | Ferro Corporation | PE, Unspecified | Ferro PE |
| GETILAN ATP/190 3AP | Crosspolimeri S.p.A. | XLPE | GETILAN |
| LNP™ LUBRICOMP™ QP004 compound | SABIC Innovative Plastics | Nylon 610 | LNP™ LUBRICOMP™ |
| Orevac® 18507 | Arkema | HDPE | Orevac® |
