Order Products : sales@su-jiao.com
KW Plastics KWR102-M4
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | KW Plastics |
| Trademark: | KW Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | a9nAVL_KW-Plastics-KWR102-M4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Mixed Color Copolymer High Density Polyethylene Post-Consumer Resin Blow Molding and Extrusion CHARACTERISTICS Good Impact Resistance, Available as mixed color or pre-colored black. |
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 0.43 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 20.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 14 | % | ASTM D638 |
| Flexural Modulus | 896 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Polypropylene | < 10 | % | ASTM D5576 |
| Weight Loss on Heating (105°C) | < 0.10 | % | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silmar® SIL93AE-1045 | Interplastic Corporation | Polyester, TS | Silmar® |
| Elvakon® 4494 | Lucite International Inc. | Acrylic (PMMA) | Elvakon® |
| Epolene® E-43P | Westlake Chemical Corporation | PP, Unspecified | Epolene® |
| PEARLSTICK® 45-60/18 | Lubrizol Advanced Materials, Inc. | TPU-Capro | PEARLSTICK® |
| Petrotene® PP A3 T20 PRTA010 PH379 MSP | Petropol Industry and Trade of Polymers LTDA | PP, Unspecified | Petrotene® PP |
