Order Products : sales@su-jiao.com
RTP 1200 S-40D UV
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | a7XVe4_RTP-1200-S-40D-UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UV Stabilized |
| General Information | |
|---|---|
| Additive |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.0 | % | ASTM D955 |
| Moisture Content | 0.020 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 40 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 68.9 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 34.5 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 800 | % | ASTM D412 |
| Tear Strength 1 | 123 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 6.0 | hr | |
| Dew Point | -34.4 | °C | |
| Processing (Melt) Temp | 193 - 218 | °C | |
| Mold Temperature | 15.6 - 32.2 | °C | |
| Injection Pressure | 27.6 - 55.2 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BESTNYL SI50VI01BHF | Triesa Plastics | Nylon 6 | BESTNYL |
| APEX® 85-J438K-1 | Teknor Apex Company | PVC, Flexible | APEX® |
| Clariant PBT PBT-1100 | Clariant Corporation | PBT | Clariant PBT |
| EL-Lene™ D795C | SCG Chemicals Co., Ltd. | LDPE | EL-Lene™ |
| IDI STC 1023 | IDI Composites International | Polyester, TS | IDI STC |
