Order Products : sales@su-jiao.com

Propilven J-846

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Propilven, S.A.
Trademark:	Propilven
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	a7GZzl_Propilven-J-846.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Propilven J-846 grade is a heterophasic copolymer specially designed for thin wall injection molding of containers, trash bins, house wares, and baskets.

Special Features:

Extremely high injecting capacity

Fast cycles

Good antistatic properties

Excellent ESCR

Good organoleptic properties

General Information
Features	Antistatic Fast Molding Cycle Food Contact Acceptable Good Moldability Good Organoleptic Properties High ESCR (Stress Crack Resist.) Impact Copolymer
Uses	Containers Household Goods Thin-walled Parts
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR)	42	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break)	27.0	MPa	ASTM D638
Flexural Modulus	1100	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	65	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	110	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
Sumikon® EME-7304LC	Sumitomo Bakelite Co., Ltd.	Epoxy	Sumikon®
Ultraform® N 2320 FC Aqua UN	BASF Corporation	Acetal (POM) Copolymer	Ultraform®
Anjacom® 050/85S-UV	Almaak International GmbH	PC+ABS	Anjacom®
DILAMID® 66 FV 15 NATURAL	Dilaplast S.p.A.	Nylon 66	DILAMID®
LEXAN™ 503R resin	SABIC Innovative Plastics	PC	LEXAN™