Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Molding M4300
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Molding |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | a6XHPK_Geon-Vinyl-Rigid-Molding-M4300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Geon™ Vinyl Rigid Molding M4300 is a Rigid Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Plumbing/Piping/Potable Water. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.32 | g/cm³ | ASTM D792 |
| Spiral Flow | 58.4 | cm | |
| Molding Shrinkage - Flow | 0.20 to 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 81 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2830 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 54.5 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 30 | % | ASTM D638 |
| Flexural Modulus | 2760 | MPa | ASTM D790 |
| Flexural Strength | 79.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| 0°C, 3.18 mm, Injection Molded | 53 | J/m | |
| 23°C, 3.18 mm, Injection Molded | 850 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.35 mm | 70.0 | °C | |
| 0.45 MPa, Annealed, 6.35 mm | 76.1 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm | 67.8 | °C | |
| 1.8 MPa, Annealed, 6.35 mm | 72.8 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm, ALL | V-0 | ||
| 1.91 mm, ALL | 5VA |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance 4(3180 µm) | 78.0 | % | ASTM D1003 |
| Haze (3180 µm) | 4.0 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 to 204 | °C |
| Note Message | |
|---|---|
| 1 . | Type I, 51 mm/min |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 51 mm/min |
| 4 . | CIE Illuminant C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Caltex PP MT62CP | GS Caltex | PP, Unspecified | Caltex PP |
| Cri-Line IF-815 | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
| EPO-TEK® E2001-6 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Kingfa PP-200 | Kingfa | PP, Unspecified | Kingfa |
| OP - PPO PPOX-225-FR | Oxford Polymers | PPE+PS | OP - PPO |
